FAQ

1. On-site operators can preliminarily determine the problem point based on the product guide. If a problem occurs that is consistent with the product guide, repair and debugging can be carried out as required.

2. If there is a problem and the product guide cannot provide guidance, you can directly contact customer service staff at  [email protected]

1. Price

No matter what kind of plasma is purchased, it is very important to consider the budget factor, because if the budget is ignored, even if the expected effect can be achieved, if it exceeds the budget too much, it may not be purchased. At present, the plasma is mainly divided into two categories: domestic and imported. Among them, the domestic price is divided into three specifications: low, medium and high, but generally speaking, users should still be able to accept it! The price of imports is several times higher than that of domestic products, and even dozens of times, and consumables such as cutting nozzles and electrodes are also much more expensive! Under normal circumstances, imported plasma has better cutting effect than domestic plasma with the same specifications. The disadvantage is that the price and later use cost are too high, which is difficult for ordinary enterprises to accept!

2. Cutting thickness

No matter what kind of plasma, it has its own most suitable cutting size range. Generally, low-power plasma is suitable for cutting thin plates. This is well-known, but the plasma power is too large, but it is not suitable for cutting thin plates! At present, domestic steel plates below 2mm are mostly cut with domestic 40-60A plasma, and occasionally imported ones are used, but the quantity is not large because the price is relatively expensive. It is hereby solemnly stated that for steel plates below 2MM, remember that except for the high-speed desktop thin plate special plasma cutting machine, any other models: such as portable, gantry, etc., are not suitable for cutting. If it exceeds 2mm, it is not subject to this restriction and can be used. For thicker steel plates such as 2-16mm steel plates, both portable and gantry models can be cut. If it is thicker, such as 25mm or even thicker plates, only gantry models are the right choice!

3. Cutting material

The technicians who are generally engaged in metal processing know that plasma is used to cut stainless steel and other alloy materials is its strength, carbon steel plate mainly relies on flame cutting to work, so as long as there is stainless steel, you must choose a plasma cutting machine! Otherwise, processing cannot be achieved with flame!

1. Check whether the chain, gears, and chain hooks are loose or falling off.

2. Adjust the sprocket seats at both ends of the chain to ensure that the two sprockets are tightened and the springs are compressed uniformly.

Contact customer service staff at  [email protected]  and we will arrange a professional after-sales engineer reply you and talk to you online and video calling.

1. Installation station: Pay attention to the ground quality, equipment weight and size, check the transportation route, door opening size, and beam height.

2. Operators: Whether the personnel are sufficient, whether they have been trained, whether the training effect is confirmed, and whether they have the qualifications to take up the job.

3. Factory power supply: Whether the workshop power supply and cables meet the equipment usage requirements, and whether the layout complies with national standards.

4. Installation materials: Confirm whether the operating materials (nitrogen, oxygen) and required configurations (air compressor, water cooler, laser, etc.) around you are complete.

Laser cutting machine is a kind of high-precision and high-efficiency cutting equipment, which is widely used in the cutting and processing of metal, non-metal and other materials. With the continuous advancement of technology and the continuous increase of market demand, the price of laser cutting machines is also constantly changing. So, how much is a fiber laser cutting machine? This article will give you a detailed introduction to the reference price information of laser cutting machines on the market.

1. Single table 1500W 1500X3000mm Cut size Fiber laser cutting machine cost about 12000-15000USD depends on different brand.
2. Single table 6000W 1500X3000mm Cut size model cost about 15000-20000USD depends on different brand.
3. Single table 3000W 2000x6000mm Cut size model cost about 18000-20000USD depends on diffferent brand.
4. Single table 60000W 2000x6000mm Cut size model cost about 20000-22000USD depends on diffferent brand.
5. Dual cutting table 3000W 1500x3000mm Cut size model cost about 25000-28000USD depends on different brand.
6. Dual cutting table 20000W 2000x6000mm Cut size model cost about 70000-80000USD depends on different brand.

1. Cutting material: Different cutting materials require different laser cutting machines, which need to be selected according to actual needs.

2. Cutting range: Choose equipment with a moderate cutting range according to actual needs to avoid wasting resources.

3. Brand and quality: Choosing well-known brands and high-quality equipment can ensure the stability and service life of the equipment.

4. After-sales service: Choose a manufacturer with perfect after-sales service to ensure the maintenance and maintenance of the equipment.

In today’s metal processing industry, laser equipment is used more and more widely. Laser cutting technology is now quite mature. In the cutting industry, it has a very large market share, but there are still many users who do not know how to choose the right laser cutting machine. Machine, in fact, can be considered from the following aspects:

1. The scope of analysis of the materials processed by the enterprise and the needs of the business
1.1 About power
First of all, we have to consider factors such as our business scope, the thickness of the cutting material, which materials to cut, etc., and then determine the power of the equipment that needs to be purchased. The thicker the plate, the more difficult it is to cut, and the greater the power required.

Nowadays, Chinese laser cutting machines are divided into the following three different types: low power, medium power and high power. Generally speaking, low-power manufacturers are the most concentrated in the market. Due to mature technology and low threshold, various manufacturers continue to simplify laser cutting machines and material cutting to maximize profits. Therefore, to choose a laser cutting machine with low power consumption, it is safest to choose a brand with quality assurance. In addition to the high quality of these equipment companies themselves, medium-power and high-power laser cutting machines are also used as a kind of information technology, so there are far fewer manufacturers of medium and high-power laser cutting machines than low-power manufacturers. After all, it is an important technology. management work.

Generally speaking, it is better to use laser to cut 12mm carbon steel and 6mm stainless steel. There is a misunderstanding that needs to be corrected. The maximum cutting thickness of laser cutting is not a high-quality cutting thickness. What does it mean? For example, the maximum cutting thickness in China is 16mm. It is a kind of machine learning that can increase the cutting speed by 16mm, but it is not suitable for enterprises to cut 16mm for a long time. Just like the development of a car in my country, the maximum speed of 200 yards cannot run 200 yards all the time, which will affect the service life of the machine.

1.2 About format
As for the size, the mainstream is 3015, which is 3 meters by 1.5 meters. However, size is not an issue. Generally speaking, the company will have various types of sizes for customers to choose from. The size of the workbench can generally be customized by the manufacturer according to the needs of customers.

1.3 About glitches
Regarding the issue of these burrs, this process is actually the most concerned by customers. Generally speaking, solid yag has a little bit of burrs, which is mainly determined by the thickness of the cutting material and the use of different gases. Generally, there is no burr if it is less than 4 mm. The gas has the best effect on nitrogen and oxygen, followed by the worst effect on air. The advantage of laser cutting of metal materials is on thin plates. If you want to cut thick plates, it is recommended to choose CO2 cutting machine control or water cutting technology and so on. In addition, if you want less burrs, you can choose a fiber laser cutting machine, the cutting surface is very smooth and fast.

1.4 About the configuration of laser cutting machine
Then, about the configuration management of Chinese laser cutting machines. With the development of the laser industry, there are more and more brands of laser cutting machines, and the prices are becoming more and more confusing. It is conceivable that the configuration of the machine is also uneven, and many manufacturers even deceive customers under the guise of the brand. Here, I hope that customers can pay attention to the core parts of China’s laser cutting: whether the laser and laser head are imported or domestic, famous or miscellaneous. At the same time, attention should also be paid to other accessories for laser cutting. For example, the motor is not an imported motor, guide rail, bed, etc., which will affect the cutting accuracy of the machine to a certain extent. One thing we need to pay attention to is the cooling control system of the laser cutting machine – the cooling cabinet. Many enterprises and companies can directly use household air conditioners to cool down. In fact, everyone knows that the effect is very bad. The best way is to use Only air conditioners dedicated to the electronics industry and special planes can truly achieve the best results.

2. Choose the right price according to your budget
Many customers take the capital input-output ratio into consideration when purchasing equipment. Compared with low-power laser cutting machines, high-power cutting efficiency must have great advantages, but the higher the power, the higher the price. Many customers want to Choose high power, but considering the affordability of funds, customers will be hesitant.

Of course, in addition to the power factor of the laser cutting machine affecting the main price of the study, other resource allocations will also have an important impact, such as air compressors, dust collectors, and water coolers. Laser cutter configurations vary from manufacturer to manufacturer, and prices can vary widely. Therefore, when choosing to use a laser cutting machine for branding, considering the price, the best solution is to choose a cost-effective laser automatic cutting machine equipment manufacturer.

3. Preliminary selection of manufacturers
After determining the requirements, we can go to the market to understand or buy laser cutting machine peers to see the performance and basic parameters of the machine. Select a few manufacturers with strength and preferential prices to conduct research on communication skills and proofing in the early stage. In the later stage, our teachers can conduct on-site inspections, and conduct on-the-spot investigations on the price of a machine, machine training, payment management methods, and after-sales service. Learn more detailed talks.

4. The the laser power capacity
When we choose the performance of the laser cutting machine, we must fully consider our own environment. The size of the laser power is very critical. For example, we often cut metal plates below 6mm, so we choose a 500W-700W laser cutting machine to meet the production requirements. Yes, if the cutting material exceeds 6mm, we need to consider a little mechanical power. Therefore, it is of great help to the cost control of the enterprise.

5. The core part of the laser cutting machine
Some of the laser cutting machines have important components, and we also need to pay great attention when purchasing. Especially for laser transmitters, laser cutting heads, motors, guide rails, water tanks, etc., it is necessary to distinguish between domestic and imported. These working parts directly affect the cutting speed and precision of Chinese laser cutting machines. Many domestic manufacturers will choose to use domestically produced parts to deceive customers.

6. The quality and stability of equipment are also important indicators
Now the research and development cycle of our products is short, the replacement is getting faster and faster, the diversity of products, sample trial production, and mass production are more, how to complete the management orders of target customers with quality and quantity, maintain the reputation of Chinese enterprises, and strengthen the core of Chinese enterprises The development of competitiveness is also a arduous task before every operator, so the purchase of processing technology equipment with relatively stable performance is the premise and foundation. Try to choose different products with a high market share, a sound after-sales service economic system, and many after-sales service outlets. Moreover, brands that have been analyzed and tested by the long-term capital market cannot buy products with poor quality of life and no after-sales service just because they are greedy for low prices. This will have a huge impact on the production of small and medium-sized enterprises.

7. After-sales service
After-sales service varies from manufacturer to manufacturer, and warranty times vary. In terms of after-sales service, we not only provide customers with an effective daily maintenance technical solution, but also have our own professional training and education system for machines and laser software to help corporate customers get started as soon as possible.

In addition, no matter how good a laser cutting machine is, users will encounter various problems during use. Faced with the problems that customers cannot solve themselves, it is particularly important for manufacturers to provide timely solutions. This is why we buy An important factor to consider when buying a laser cutter.